Finisher I

Additional Locations: Requisition ID: 21270 E-ONE manufactures custom and commercial fire trucks including pumpers and tankers, aerial ladders and platforms, rescues of all sizes, quick attack units, industrial trucks, and ARFF (aircraft rescue firefighting vehicles).
Established in 1974, E-ONE has grown to become an industry leader in just a few decades, and today employs more than 1,000 people who manufacture over 400 fire trucks per year.
Innovation has been the company's driving force and continues to be the impetus behind its pursuit of innovative technologies.
The result is state-of-the-art fire rescue vehicles recognized for superior firefighting and rescue capabilities.
E-ONE is part of the larger REV Group (NYSE: REVG), a leading manufacturer of specialty vehicles for the fire & emergency and recreation markets.
REV Group’s extensive vehicle line-up includes models such as ambulances, fire trucks, terminal trucks, RV’s and much more.
Our 6,500+ employees continuously demonstrate their commitment to building innovative and reliable vehicles that our customers can depend on whether for a family trip across the U.
S.
or when responding to an emergency.
Rev Group is a veteran friendly employer and hires over 200 veterans and or those transferring out of the military each year.
SCOPE: Perform duties to sand, grind, mount, or repair any unit preparation for welding, assembly operations or paint, to meet specifications as part of the manufacture of large, custom, special purpose vehicles, working within the limits of prescribed routines.
ESSENTIAL FUNCTIONS: • May sand or grind pats or bevel edged in preparation for welding.
May feather, flute, flat and level grind, remove server corners to overcome surface stress areas subject to fatigue fractures or perform other similar conditions.
May remove sharp edges or burns, detect dents, holes and substrate Work from process sheet, shop orders, prints, schedule, pick-lists, and instructions.
• Review material and production requirements.
Obtain and accumulate tools and materials, move to work area.
• Blow off and wipe down components or unit to remove grit, grease and other foreign surfaces.
Check cab, body or component structure for obvious defects such as dents in panel sections, rough welds beads, fractures, undulations or wavy surfaces and similar conditions.
• defects, apply fillers, file or sand area to meet surface finish requirements.
May apply primer over corrected areas of body and expose aluminum.
• May wire brush welds to remove smoke, grind and remove excess weld beads to smooth surface, remove residue from weld area, and apply compound and buff surface to meet cosmetic criteria and specifications.
Recognize and call attention to weld defects such as fractures, voids, porosity and distortion.
Check and recognize part surfaces requiring smooth surfaces, sand and apply polishing compound and buff as required.
Change grades of abrasive or compounds to suit finishing requirements and to finish surfaces of parts to prepare for future processing or as a final process, clean and buff surfaces such as tread plate, and remove scratches on non-painted surfaces.
• May remove doors or other components and place on work stand or fixture, pull required hinges and backup nars and mount in place.
• May flat surface sand specified pieces and vary pressure of sander to obtain symmetrical pattern across surface to meet cosmetic requirements.
• Monitor the quality of work performed in assigned area of responsibility.
• Follow work standards • Must be able to perform within physical requirements including, but not limited to 45 lb.
single lift; walking, kneeling, squatting and standing for long periods of time.
OTHER DUTIES MAY INCLUDE, BUT ARE NOT LIMITED TO: • Perform or assist with any operations, as required or directed, to maintain work flow or respond to production requirements.
• May be required to perform other duties not listed but needed by Supervisor in order to keep trucks on schedule.
TOOLS AND EQUIPMENT USED: Hand and powered tools, spraying equipment, forklift, fixtures, sanders, grinders, tape measures, squares, files.
POSITION EXPECTATIONS: 1.
SAFETY: Follow E-ONE General Health & Safety Rules, ensure safe operating conditions within area of responsibility, and notify coworkers and supervisors of hazardous acts and conditions.
Proper use of PPE; use only defect-free equipment.
Promote safety in department.
Use proper lifting techniques and overhead hoist when needed.
Maintain clean and safe working environment in line with 5-S Philosophy.
Participate in hazardous communication training and safety meetings.
2.
QUALITY: Responsible for the quality of work.
This requires defect-free work and understanding of the requirements of the company’s quality system as it pertains to job duties and responsibilities.
Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards.
Identify and segregate non-conforming product.
Identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate.
3.
FLEXIBILITY: Able and willing to work in other areas as needed.
Must be flexible in taking lunch and breaks when workflow requires.
Willing to work additional hours as necessary.
4.
INITIATIVE: Actively participate in continuous improvement of products and processes to better serve customers and improve the overall profitability of E-ONE.
Actively seek out work in other areas when current assignment is complete.
Make suggestions for improving product quality, processes, safety, and company profitability.
5.
TEAMWORK: Positive working attitude toward other employees; be a team player.
Work with others constructively and abide by company policies and procedures.
Working together as a team for continuous improvement is vital to ensure the future of E-ONE and its employees.
Teamwork will be required to be effective in daily production assignments as well as special improvement projects.
6.
CAREER DEVELOPMENT: Attend and participate in a variety of meetings, training programs, and task force groups to integrate activities, communicate issues, obtain approvals, resolve problems, and maintain specific level of knowledge pertaining to changes to equipment or process, new developments, requirements, procedures, and policies.
7.
LEADERSHIP: Lead the team, provide innovative thought leadership on strategies to grow market share, increase profitability, and meet long-term business goals.
8.
ACTION-ORIENTED: Enjoy working hard; is action-oriented and energetic; not fearful of acting with a minimum of planning; seize more opportunities than others.
9.
CONFLICT MANAGEMENT: Step up to conflicts, seeing them as opportunities; read situations quickly; good at focused listening; can hammer out tough agreements and settle disputes equitably; can find common ground and get cooperation.
10.
DEALING WITH AMBIGUITY: Can effectively cope with change; can shift gears comfortably; can decide and act without having the total picture; isn’t upset when things are up in the air; doesn’t have to finish things before moving on; can comfortably handle risk and uncertainty.
11.
DRIVE FOR RESULTS: Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom-line oriented; steadfastly pushes self and others for results.
MINIMUM REQUIREMENTS: High School diploma or GED equivalent Effective communication skills, written and oral Good math skills Forklift license (must be able to obtain an E-ONE-issued forklift license) Recordkeeping abilities Knowledge of and adherence to E-ONE safety practices REV Group is committed to a policy of equal employment opportunity.
The Company conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran's status, pregnancy, genetic information, sexual orientation, or any other basis prohibited by law.
REV Group also undertakes affirmative action to assure equal employment opportunities for minorities and women, for persons with disabilities, and for protected veterans.
NOTICE FOR CALIFORNIA RESIDENTS Effective January 1, 2020, pursuant to the California Consumer Privacy Act of 2018 (as amended, the "CCPA"), if you are a California resident, you may have certain additional rights.
Please click on the link for a description of those rights and how California residents may exercise them.